25
Tidying Up the Connected Cables
―
Refer to "Attaching the Stand (
)" for more information on how to organise cables for the S49AG95*N model.
S27AG50* / S32AG50* / S27AG52* / S32AG52*
1
1
1
2
Connect the corresponding cables.
Pull the right side of the HOLDER-STAND CABLE
to remove from the stand. The left side of the
HOLDER-STAND CABLE can be damaged when
pulled forcibly.
1
3
Put both cables in the cable holder on the stand
(HOLDER-STAND CABLE) to organise the cables,
as shown in the figure.
Assembly is complete.
S28AG70*
1
1
2
Connect the corresponding cables.
Arrange the cables against the bend tendency of
the cables and pull the cables out of the COVER-
REAR SUB grooves.
1
3
1
4
Pull the right side of the HOLDER-STAND CABLE
to remove from the stand. The left side of the
HOLDER-STAND CABLE can be damaged when
pulled forcibly.
Put both cables in the cable holder on the stand
(HOLDER-STAND CABLE) to organise the cables,
as shown in the figure.
Assembly is complete.
