36 English
Elec
tric o
v
en
Electric oven
After a Hybrid cleaning cycle
•
Take care when opening the door after a Hybrid cleaning procedures has
ended. The water on the bottom is hot.
•
Open the oven door and remove the remaining water with a sponge. Do not
leave the residual water in the oven for any length of time. Wipe the oven
clean and dry with a soft cloth. Do not forget to wipe under the oven door
seal.
•
Use a detergent-soaked sponge, a soft brush, or a nylon scrubber to wipe the
oven interior. Remove stubborn residue with a nylon scourer. You can remove
lime deposits with a cloth soaked in vinegar.
•
If the oven remains dirty, you can repeat the procedure once the oven has
cooled.
•
For heavy residue, such as grease left over from roasting, we recommend
that you rub detergent into the residue before activating the Hybrid cleaning
function.
•
After cleaning, leave the oven door ajar at a 15° angle to allow the interior
enamel surface to dry thoroughly.
NOTE
•
You will not be able to start a Hybrid cleaning cycle if the Child Lock feature is
activated or if the oven’s temperature is too hot.
•
The oven door locks automatically. The display will show the cleaning time
remaining. You cannot open the oven door until the temperature drops to a
safe/cool temperature.
•
If the oven is not clean after one cycle, repeat the cycle.
•
You cannot set the oven for cooking until the oven is cool enough for the door
to unlock.
To perform the hybrid cleaning cycle
1.
Make sure the oven door is unlocked
and closed completely.
2.
Turn the mode and temperature
selector knobs to the
OFF
position. Turn
the mode selector knob from
OFF
to the
Clean
position.
3.
Press
<
,
>
to select Hybrid Cleaning
mode. Press
OK
to start Hybrid
Cleaning.
4.
Follow the on-screen instructions.
Hybrid Cleaning will start automatically
after the oven senses water in the
water reservoir.
5.
When Hybrid Cleaning is complete,
clean the oven’s interior. There will be a
significant amount of water remaining
on the bottom of the oven after a
Hybrid Cleaning cycle. Remove the
residual water with a sponge or soft
dry cloth.
Mode Selector Knob
Clean Mode
Hybrid
NOTE
•
For Hybrid cleaning, use exactly 20 oz (600 ml). of water since this produces
the best results.
•
You can cancel Hybrid Cleaning at any time by setting the mode selector knob
to the
OFF
position.
NY9900R_CHEF_NY36R9966PS_AA_DG68-01105B-00_EN+MES+CFR.indb 36
2019-02-06 1:26:32
Содержание NY36R9966P
