English 13
Ins
tallation r
equir
ement
s
CAUTION
Do not grasp the knob, handle and push when you install.
CAUTION
DO NOT
install the oven so that the door is flush with the cabinet.
For OTR over Gas Stove, please follow local GAS CODE.
Installation requirements
Location requirements
Clearances and dimensions
BEFORE YOU BEGIN
to install this appliance, refer to the following information,
dimensions, and clearances.
Do not locate the range where it may be subject
to strong drafts.
Provide adequate clearances between the range and adjacent
combustible surfaces. These dimensions must be met for safe use of the range.
The location of the electrical outlet and gas piping may be adjusted to meet the
following dimensions and clearances.
CAUTION
This range has been designed to comply with the maximum allowable wood
cabinet temperature of 194 °F (90 °C). Make sure the wall covering, countertops,
and cabinets around the range can withstand the heat (up to 194 °F [90 °C])
generated by the range. If not, discoloration, delamination, or melting may occur.
0 in
(0 cm)
24 in
(61 cm)
Lower
Cabinet
Depth
4 in
(10.2 cm)
6 in
(15.2 cm)
Side
Clearance
Above
Cooking
Surface to
Wall
36 in
(91.4 cm)
30 in
(76.2 cm)
18 in
(45.7 cm)
24.2 in
(61.5 cm)
30 in
(76.2 cm)
0 in (0 cm)
Clearance
Below
Cooking Top
and at Rear
and Sides of
Range
Minimum from
top of cooktop to
cabinets
13 in (33 cm)
Overhead
Cabinet Depth
Install_NX60T8751_BEST_BETTER_AA_DG68-01243A-03_EN+MES+CFR_210119.indb 13
Install_NX60T8751_BEST_BETTER_AA_DG68-01243A-03_EN+MES+CFR_210119.indb 13
2021-01-19 오후 3:23:37
2021-01-19 오후 3:23:37