Samsung NX58R4311SS Скачать руководство пользователя страница 32

Страница: 32 / 67

3. Disassembly and Reassembly

This document can not be used without Samsung’s authorization.

3-20 Replacing the Assy Valve Safety

WARNING

ELECTRICAL SHOCK HAZARD

Disconnect power before servicing the range. Replace all panels before operating range. Failure to do so

can result in death or electrical shock.

WARNING

EXPLOSION, FIRE, AND ASPHYXIATION HAZARD

Shut off gas supply to the range before servicing. Check all gas lines and fittings for leaks before operating

the range. Replace all panels before operating range. Failure to do so can result in death or personal

injury from explosion, fire, or asphyxiation.

CAUTION

When you work on the gas range, be careful when handling sheet metal parts. Sharp edges may be

present, and you can cut yourself if you are not careful.

Parts

Explanation Photo

Explanation

Assy Valve

Safety

SUPPORT REGULATOR

[ Rear ]

Turn off the electrical supply going

to the range.

Shut off the gas shut-off valve in

the gas supply line to the range.

Remove the regulator support

bracket from the rear of the range

Carefully identify and mark the

wires going to the ASSY VALVE

SAFETY. Disconnect the 4 wires.

ASSY VALVE SAFETY

[ Front ]

WARNING

Cross-wiring the wires to the

ASSY VALVE SAFETY creates an

explosion hazard that can result

in death, personal injury, and/or

property and product damage.

Using a tubing wrench and a

channel-lock wrench, disconnect

the 3 gas lines from the ASSY

VALVE SAFETY. Do not bend or

crimp gas lines during removal.

Remove

gas fittings from the

ASSY VALVE SAFETY.

Remove 4 screws and the ASSY

VALVE SAFETY from the back wall

of the warming drawer opening.

Содержание NX58R4311SS




































































Результаты поиска

Содержание NX58R4311SS

Отзывы:

Бренды по названию

Популярные бренды

Samsung NX58R4311SS, Руководство по обслуживанию

Результаты поиска

Содержание NX58R4311SS

Отзывы:

Бренды по названию

Популярные бренды