Samsung NX58R4311SS Скачать руководство пользователя страница 12

Страница: 12 / 67

3. Disassembly and Reassembly

This document can not be used without Samsung’s authorization.

3-2 Removing the Rear Cover Panels

WARNING

ELECTRICAL SHOCK HAZARD

Disconnect power before servicing the range. Replace all panels before operating range. Failure to do so

can result in death or electrical shock.

WARNING

EXPLOSION, FIRE, AND ASPHYXIATION HAZARD

Shut off gas supply to the range before servicing. Check all gas lines and fittings for leaks before operating

the range. Replace all panels before operating range. Failure to do so can result in death or personal

injury from explosion, fire, or asphyxiation.

CAUTION

When you work on the gas range, be careful when handling sheet metal parts. Sharp edges may be

present, and you can cut yourself if you are not careful.

Parts

Explanation Photo

Explanation

Cover-Wire LT/

Cover-Wire LT

Cover-Wire RT

Turn off the electrical supply

going to the range.

Shut off the gas shut-off valve

in the gas supply line to the

range.

Pull the range away from the

wall so that you can access the

rear panel.

Remove 2 screws at the Cover

Wire LT/RT and pull out the

cover

Cover-Back

Guard Wire

Cover-Back Guard Wire

Remove 2screws at the cover

and pull out the cover from the

upper back of the range

Cover-

Convection

Cover-Convection

Remove 3screws at the cover

and pull out the cover from the

range.

Содержание NX58R4311SS




































































Результаты поиска

Содержание NX58R4311SS

Отзывы:

Бренды по названию

Популярные бренды

Samsung NX58R4311SS, Руководство по обслуживанию

Результаты поиска

Содержание NX58R4311SS

Отзывы:

Бренды по названию

Популярные бренды