Español 47
Mant
enimient
o
NOTA
Asegúrese de que todos los quemadores superiores
estén apagados cuando el horno ejecute un ciclo
de auto-limpieza. La auto-limpieza no funcionará si
hay algún quemador superior encendido.
Para retardar el inicio del ciclo de auto-limpieza
3
2
4
1.
Repita los pasos 1 y 2 en la página anterior.
2.
Presione la tecla
Delay Start (Inicio retardado)
. La puerta del horno se traba.
3.
Ajuste la hora a la cual desea que el horno inicie la auto-limpieza utilizando el teclado numérico.
4.
Presione la tecla
START/SET (INICIO/CONFIGURAR)
. El horno comenzará la auto-
limpieza a la hora especificada.
Para cancelar el ciclo de auto-limpieza
Es posible que se vea en la necesidad de detener o interrumpir un ciclo de auto-limpieza debido
a humo dentro del horno. Para apagar el ciclo de auto-limpieza, presione la tecla
OFF/CLEAR
(APAGAR/BORRAR)
. El ciclo se apaga, pero la puerta permanece bloqueada y el icono de bloqueo
parpadea hasta que la temperatura del horno desciende por debajo de los 400 °F (200 °C).
Después de la auto-limpieza
•
La puerta sigue bloqueada hasta que la temperatura interna del horno desciende por
debajo de los 400 °F.
•
Una vez que se enfrió el horno, limpie las superficies del horno con un paño para retirar
residuos de cenizas.
•
Las manchas rebeldes pueden quitarse con una esponja de lana de acero. Los depósitos
calcáreos pueden quitarse con un paño empapado en vinagre.
•
Si no está satisfecho con los resultados de la limpieza, repita el ciclo. “HOT” aparece en
la pantalla hasta que el horno se enfría. Espere hasta que desaparezca el mensaje y,
luego, inicie un nuevo ciclo.
•
El ventilador de enfriamiento comienza a funcionar automáticamente durante un
tiempo después de la auto-limpieza.
PRECAUCIÓN
No intente abrir la puerta del horno inmediatamente después de completarse el ciclo de
auto-limpieza. El horno sigue estando muy caliente cuando la puerta se desbloquea.
El aire caliente y el vapor que salen podrían quemarlo.
Reemplazo de la luz del horno
Luz del horno
La luz del horno es una bombilla para electrodomésticos estándar de 40 watts. Se
enciende cuando se abre la puerta del horno.
Retirar
Cubierta de vidrio
de la bombilla
Bombilla
Volver a colocar
1.
Apague el horno.
2.
Asegúrese de que el horno y la luz del horno
se encuentren fríos.
3.
Abra la puerta y retire la tapa de vidrio
girándola hacia la izquierda.
4.
Retire la luz del horno de la toma girándola
hacia la izquierda.
5.
Inserte una bombilla para electrodomésticos
de 40 watts en la toma y, luego, gírela hacia
la derecha para ajustarla.
6.
Vuelva a colocar la tapa de vidrio y, luego,
gírela hacia la derecha para ajustarla.
PRECAUCIÓN
Para evitar las descargas eléctricas, asegúrese de que el horno esté apagado y frío antes
de reemplazar la luz del horno.
NOTAS
•
La luz del horno no funciona durante el ciclo de auto-limpieza.
•
Retire las parrillas si obstaculizan el acceso a la luz del horno.
Содержание NX58K9850SS
