Using Options 61
2.
Using a screwdriver, remove the screw that holds the memory-module
compartment door in place.
3.
Grasp the edge of the door and pull the door off the chassis.
4.
Remove installed modules if necessary:
5.
Align the connector on the memory module with the connector of the slot.
6.
Push the memory module into the slot at a slight angle until the connectors are fully
engaged.
7.
Push down on the edge of the memory module until the module snaps into place.
8.
Align the memory module compartment door with the compartment and push the
door down until it snaps into place.
9.
Reinstall the screw you removed in step 2.
10.
Turn on the computer and perform a complete POST to check the memory
integrity.
45
o
Matrix 3 Plus (Windows XP) - English.fm Page 61 Wednesday, March 27, 2002 10:41 AM
