manualshive.com logo in svg

Samsung NS 1DXEA Series, Руководство по установке, Страница: 14 / 26

Поделиться
Скачать
Samsung NS 1DXEA Series Скачать руководство пользователя страница 14

14

AA

Connecting the connection cord

•    Always remember to connect the refrigerant pipes before performing the electric connections. 

 

When disconnecting the system, always disconnect the electric cables before disconnecting the refrigerant pipes.

•    Always remember to connect the air conditioner to the grounding system before performing 

 

the electric connections. 

The indoor unit is powered by the outdoor unit by means of a H07RN-F/H05RN-F connection cable (or a more power model),  

with insulation in synthetic rubber and jacket in polychloroprene(neoprene), in accordance with the requirements of standard EN 60335-2-40.

1.  Remove the screw on the electrical component box and remove the cover plate.

2.  Route the connection cord through the side of the indoor unit and connect the cable to terminals; refer to the figure below.

3.  Route the other end of the cable to the outdoor unit through the ceiling & the hole on the wall.

4.  Reassemble the electrical component box cover, carefully tightening the screw.

Wiring diagram

1 phase

1(L)

2(N)

N

L

1(L)

2(N)

Indoor Unit

Outdoor Unit

Main power cable

Cable clamp

Indoor Power

Communication cable

Cable tie

Connecting the connection cord

CAC 유럽향 1way_IM_34507A-05_EN.indd   14

2016-08-02   오후 4:08:11

Содержание NS 1DXEA Series



























Отзывы:

Нет отзывов