System Management 99
Upgrading Memory
This computer has one or more 512MB memory module(s). Two memory module
sockets are provided so that you can replace memory or install an additional memory
module.
Removing the memory module
Before removing or replacing the memory module, turn the system off com-
pletely and remove the battery and AC adapter. Do not replace the memory
module when the system is in Standby or Hibernation mode.
When using memory in dual channel, using memory of the same specification
(the same capacity and manufacturer) is recommended.
1.
Using a screwdriver, open the memory module compartment cover on the bottom
of the computer.
2.
Push the memory module tabs outward to pop the memory module upwards. Care-
fully pull the module out at an angle of about 30
°
.
screw
