14
3. Disassembly and Reassembly
3-4 Removing The Latch-Door & Switch-Door Plunger(Continued)
WARNING
ELECTRICAL SHOCK HAZARD
Disconnect power before servicing the range. Replace all panels before operating range. Failure to do so
can result in death or electrical shock.
CAUTION
When you work on the electric range, be careful when handling the sheet metal parts. Sharp edges may be
present, and you can cut yourself if you are not careful.
Parts
Explanation Photo
Explanation
Latch-Door
& Switch-
Door
Plunger
1.
Turn off the electrical supply going to the range.
2.
Open the oven door.
3.
Raise the cooktop
(see page 12 for the procedure).
4.
To remove the Latch-Door:
a) Remove the 2 screws from the front of cavity.
b)
Remove two screw from Cover-Back Main and
remove latch-door
5.
To remove the Switch-Door Plunger
a)
Remove the Cover-Back Guard Wire
(see page 10 for the procedure).
b)
Release the wire from Cable Clamp.
