Samsung NA10 Скачать руководство пользователя

Страница: 35 / 74

26 Users Manual

Using the Disk Drives

Using the Floppy Disk Drive

Your computer comes with a 1.44 MB, 3.5-inch, floppy drive.
To use a floppy disk in your computer, insert it into the floppy drive.

To remove a floppy disk, press the floppy disk eject button on the front of the floppy
drive.
To protect the data on your floppy disks, follow the Floppy Disk manufacturers
guidelines.

Using the CD/DVD-ROM Drive

Compact discs are designed so that you can easily insert one into the computer when
you need it, and then remove it.

DVD Notes:

A DVD player is a factory option and if you ordered this option you will have to
install the provided DVD software to view the DVD Title.

Press the button on the CD-ROM or DVD-ROM drive, and the tray slides out.
(Do not lean on the tray; because it will not support much weight).

Floppy Disk Eject Button

LEO II (2) (Windows XP) - English.fm Page 26 Wednesday, June 19, 2002 3:36 PM

Содержание NA10











































































Результаты поиска

Содержание NA10

Отзывы:

Похожие инструкции для NA10

Бренды по названию

Популярные бренды

Samsung NA10, Руководство пользователя

Результаты поиска

Содержание NA10

Отзывы:

Похожие инструкции для NA10

Бренды по названию

Популярные бренды