SCH-N150 User Guide Draft Rev 1.2 3/16/01
48
Connect
With the Connect option set to on, the phone sounds a connect alert
tone when your call is connected.
To set the connect alert On or Off:
1. Press [MENU] to display the menu.
2. Press [5 JKL] for Sounds.
3. Press [4 GHI] for Alerts.
4.
Press [3 DEF] for Connect.
5.
Scroll between On and Off using the navigation key. When the desired setting is displayed,
press [OK/Message] to save.
6. To cancel, press [C] to return to the previous menu.
Disconnect
When the Disconnect option is set to on, the phone sounds a
disconnect alert tone a call is dropped or failed.
To set the disconnect alert On or Off:
1. Press [MENU] to display the menu.
2. Press [5 JKL] for Sounds.
3. Press [4 GHI] for Alerts.
4.
Press [4 GHI] for Disconnect.
5.
Scroll between On and Off using the navigation key. When the desired setting is displayed,
press [OK/Message] to save.
6. To cancel, press [C] to return to the previous menu.
Fade
When the Fade menu option is set to on, the phone sounds an alert
when a dropped call occurs during conversation because of a signal fade.
To set the fade alert On or Off:
1. Press [MENU] to display the menu.
2. Press [5 JKL] for Sounds.
3. Press [4 GHI] for Alerts.
4.
Press [5 JKL] for Fade.
5.
Scroll between On and Off using the navigation key. When the desired setting is displayed,
press [OK/Message] to save.
6. To cancel, press [C] to return to the previous menu.
Note:
When call fail or drop occurs, a text notification displays to alert you.
.
Press [C] to clear the notification and return to standby mode.
.
If the dropped call was an outgoing call from your phone, you can redial
the number automatically by pressing [SEND] twice.
Roam
When the Roam option is set to on, the phone sounds a distinctive
ringer type for incoming roaming calls .
To set a distinctive ringer for incoming roam calls:
1. Press [MENU] to display the menu.
2. Press [5 JKL] for Sounds.
3. Press [4 GHI] for Alerts.
4.
Press [6 MNO] for Roam.
5.
Scroll between On and Off using the navigation key. When the desired setting is displayed,
press [OK/Message] to save.
6. To cancel, press [C] to return to the previous menu.