background image

118

119

Chapter 5 

Appendix

European Telecommunication Information  

(for products fitted with EU-approved modems)

Marking by the symbol 

 indicates compliance of this equipment 

to the Radio and Telecom Terminal Equipment Directive 1999/5/

EC. Such marking is indicative that this equipment meets or 

exceeds the following technical standards:
CTR 21 - Attachment requirements for pan-European approval for 

connection to the analogue Public Switched Telephone Networks 

(PSTNs) of TE (excluding TE supporting voice telephony services) in 

which network addressing, if provided, is by means of Dual Tone 

Multi-Frequency (DTMF) signaling.

Although this equipment can use either loop disconnect 

(pulse) or DTMF (tone) signaling, only the performance of 

the DTMF signaling is subject to regulatory requirements for 

correct operation.
It is therefore strongly recommended that the equipment 

is set to use DTMF signaling for access to public or private 

emergency services. DTMF signaling also provides faster call 

setup.

This equipment has been approved to Council Decision 98/482/

EEC - “CTR 21” for Pan-European single terminal connection to the 

Public Switched Telephone Network (PSTN).
However, due to differences between the individual PSTNs 

provided in different countries, the approval does not, of itself, 

give an unconditional assurance of successful operation on every 

PSTN termination point. In the event of problems, you should 

contact manufacturer Technical Support.

Regulatory Compliance Statements

Содержание N-Series

































































































































Отзывы: