background image

48

Chapter 2

Using the computer

 Multi Card Slot 

(Optional)

Using the multi card slot, you can read and write data to a SD card, 

SDHC card, MMC card, SDXC card.
You can use a card as a removable disk and conveniently 

exchange data with digital devices such as a digital camera, digital 

camcorder, MP3, etc..

Supported Cards : SD Card, SDHC card, MMC card, SDXC 

• 

card
You have to additionally purchase a multi card with the 

• 

necessary capacity depending on your requirements.
You can use a multi card just like any data storage device. A 

• 

copyright protection function is not supported.
Since you can lose a card when moving the computer, 

• 

keep the card separately.
The fi gures used for the description are of a representative 

• 

model. Therefore the fi gures may diff er from the real ones.
If a slot protection dummy card is inserted into your 

• 

computer, remove the dummy card before using the 

computer.
These descriptions are written based on Windows 7, the 

• 

latest operating system. Therefore, some descriptions and 

fi gures may diff er from your operating system. But as the 

usage is similar to other Windows operating systems, you 

can use these descriptions for reference.

Using the card

1

  Insert a card into the slot according to the directions printed 

on the slot.

Example) SD Card

2

  The card drive appears. Click 

Open folder and view fi les

.

If the window does not appear, click 

Start > Computer

.

Содержание N-Series

































































































































Отзывы: