Samsung MXJ-HA2512 Series Скачать руководство пользователя страница 35

Страница: 35 / 137

Installation guide

Problem analysis



Inappropriate product management caused outer

packaging damage.

Consequence



After damage to the outer packaging of indoor unit, dust

and other foreign substances entered to

and other foreign substances entered to the product.

the product.

Furthermore, you may lose <Installation manual>, <User

Furthermore, you may lose <Installation manual>, <User
manual>, drainpipe or other parts needed for

manual>, drainpipe or other parts needed for
installation.

installation.

Standard procedure



Strictly regulate the package removal before installing

the indoor units. Manage and keep all the related parts

the indoor units. Manage and keep all the related parts
and manuals thoroughly.

and manuals thoroughly.

Proper method



After indoor units arrive in the site, do not remove the

package until it is being installed. When removing the

package until it is being installed. When removing the
package upon the installation of the product, keep the

package upon the installation of the product, keep the

manuals separately and use other accessories

(such as drainpipe) properly.

Take extra care to prevent from losing them.

Содержание MXJ-HA2512 Series










































































































































Результаты поиска

Содержание MXJ-HA2512 Series

Отзывы:

Samsung MXJ-HA2512 Series, Руководство по установке, Страница: 35 / 137

Результаты поиска

Содержание MXJ-HA2512 Series

Отзывы: