8
English
English
8
English
9
Checking or Editing the
Programmed Tracks
This function is not available during playback of an
MP3/WMA-CD.
•
You can program the playback order of up to 24
tracks of your choice.
•
However, you must stop playing the CD before
selecting tracks.
1.
While in CD playback mode, press the
STOP
(
@
)
button to stop playing the CD.
2.
Press the
ENTER
(
)
button to display the
message below:
(01= program number, --= track number)
3.
Use the
[
or
]
button to move to a desired
track.
•
Press
[
to move to the previous track.
•
Press
]
to move to the next track.
4.
Press the
ENTER
(
)
button to confirm your
selection, the selection is stored and
is displayed.
5.
To select a different track, following the steps 3
to 4 above.
6.
Press the
PLAY
(
+
) button to play the
programmed tracks.
7.
Press the
STOP
(
@
) button to stop playing the
programmed tracks, Press the
STOP
(
@
) button
again to cancel playing the programmed tracks.
•
If you open the disc tray or turn off the
product, your programming will be canceled.
You can check a list of programmed tracks and
edit them as you want.
1.
If a programmed track is being played, press the
STOP (
@
) button once.
2.
Press the
ENTER
(
)
button twice to display
the message below:
(C=Check, 01= program number)
➣
If a total of 24 tracks are already pro-
grammed, “
C
” will be displayed rather
than “
P
” in the display.
3.
Repeat pressing the
ENTER
(
)
button until
the desired track is displayed.
4.
Press the
[
or
]
button to select a different
track.
5.
Press the
ENTER
(
)
button to confirm your
selection.
6.
To play the programmed tracks, press the
PLAY
(
+
) button.
You can repeatedly play back a designated section
of a CD.
1.
Press the
REPEAT A-B
button at the beginning
of desired part.
•
'RPT A'
will be displayed.
2.
Press the
REPEAT A-B
button at the ending of
desired part.
•
'RPT AB'
will be displayed.
3.
To cancel
REPEAT A-B
function, press the
REPEAT A-B
button again.
•
'OFF'
will be displayed.
➣
REPEAT A-B function is available within a track.
You can circularly play between the disc and the USB.
1.
Press the
AUTO CHANGE
button on the main unit.
Each time press this button, the mode will switch as
following:
AUTO CHANGE OFF
;
AUTO CHANGE ON
•
When the auto change mode is "ON", the music will
be played on
DISC
➝
USB1
➝
USB2
continuously.
•
When the auto change mode is "ON", if you press
the
POWER
button, function change button or the
OPEN/CLOSE
button, the auto change function
automatically switches to "OFF" mode.
•
When USB is playing, if you disconnected the USB,
the auto change function automatically switches to
"OFF" mode.
•
When the auto change mode is "ON", the recording
can't work.
•
When the auto change mode is "ON",
the REPEAT,
SLEEP function can't work and automatically changes
to OFF.
•
When the auto change mode is "ON",
the REC
SPEED, USB 2 REC, REPEAT, PROGRAM, DELETE
and SLEEP function can't work.
•
If there's no USB 1, it will jump to USB 2.
•
If there's no USB 2, it will jump to DISC or USB 1.
A-B Repeat Playback
Auto Change Function
10 Skip Function
CD Programming
Press the
+10
or
-10
button while in playback mode.
This will skip the tracks as many as 10 or -10 from
the current track.
MX-E750-E760-E761-E770-E771-0417.indd 9
2012-4-24 18:04:04
