10
English
English
10
English
11
c
Press the
TUNING/ALBUM
,
or
.
button to set
the minutes.
d
Press the
ENTER
(
)
button.
Result:
VOL XX
is displayed, where
XX
corre-
sponds to the volume already set.
6.
Press th
e
TUNING/ALBUM
,
or
.
button to adjust
the volume level and press the
ENTER (
)
button.
Result: The source to be selected is displayed.
7.
Press th
e
TUNING/ALBUM
,
or
.
button to select
the desired source to be played when the system
switches on.
If you select...
You must also...
FM/AM (radio) ...........
a
Press the
ENTER
(
)
button.
b
Select a preset station by
pressing the
TUNING/ALBUM
,
or
.
button.
CD/MP3 (compact disc) .......Load one compact disc.
USB1/USB 2 .............Connect the USB device.
8.
Press
the
ENTER
(
)
button.
Result:
CHKREC
(Do you want to record?) is displayed.
9.
Press
the
ENTER
(
)
button.
Result:
REC N
is displayed, you can press the
TUN-
ING/ALBUM
,
or
.
button to select the
REC Y
or
REC N
, and then press
ENTER
(
)
button.
1)
If you select the
REC N
, it will cancel tuner timing
recording even if you have already set the tuner timing
recording.
2)
If you select the
REC Y
, you can set the tuner timing
recording.
a.
Press the
ENTER
(
)
button.
Result:
ON
is displayed for a few seconds, you can
set the tuner timing recording switch-on time.
b.
Press the
ENTER
(
)
button.
Result:
OFF
is displayed for a few seconds, you can
set the tuner timing recording switch-off time.
The timer enables you to switch the system on or
off at specific times automatically.
•
Before setting the timer, check that the current time
is correct.
•
For each step, you have a few seconds to set the
required options. If you exceed this time, you must
start again.
•
If you no longer want the system to be switched on
or off automatically, you must cancel the timer by
pressing the
TIMER ON/OFF
button.
Example:
You wish to wake up to music every morning.
1.
Switch the system on by pressing the
POWER
(
)
button.
2.
Press the
TIMER SET
button until
TIME
is displayed.
3.
Press the
ENTER
(
)
button.
Result:
ON
is displayed for a few seconds, you can
set the timer switch-on time.
4.
Set the timer switch-on time.
a
Press the
TUNING/ALBUM
,
or
.
button to
set the hours.
b
Press the
ENTER
(
)
button.
Result: The minutes flash.
c
Press the
TUNING/ALBUM
,
or
.
button to
set the minutes.
d
Press the
ENTER
(
)
button.
Result:
OFF
is displayed for a few seconds, you can
now set the timer switch-off time.
5.
Set the timer switch-off time.
a
Press the
TUNING/ALBUM
,
or
.
button to
set the hours.
b
Press the
ENTER
(
)
button.
Result: The minutes flash.
Timer Function
After having set the timer, it will start automatically as
shown by the TIMER indication on the display. If you
no longer wish to use the timer, you must cancel it.
To...
Press the TIMER ON/OFF button....
Cancel the timer ......... Once.
Result: is no longer displayed.
Restart the timer ......... Twice.
Result: is displayed again.
•
When
you select the TIMER OFF mode, the TIMER
RECORDING and TIME function are not available.
•
The maximal
tuner timing recording time is 5 hours.
•
If the timer swit
ch on and off times are identical, the word
ERROR
is displayed.
•
You may
use
]
,
[
buttons on the main unit to instead of
the
TUNING/ALBUM
,
or
.
button to adjust in step 4 to 9.
•
If the switc
h-on or -off time is the same as the timing recording
time, only the switch-on or -off time is effective, and the timing
recording time is not applied.
•
If th
e auto timer is turned on,the MP3/CD or USB function
may require an additional step to be activated depending on
the disc(or device). So it is better for you to select the tuner
function instead.
Setting the Clock
For each step, you have a few seconds to set the
required options. If you exceed this time, you must
start again.
1.
Switch the system on by pressing the
POWER
(
) button.
2.
Press the
TIMER SET
button and then press the
ENTER
(
)
button, "CLOCK" is displayed.
3.
Press the
ENTER
(
)
button, the hour flashes.
•
Increase the hours:
,
•
Decrease the hours:
.
4.
When the correct hour is displayed, press the
ENTER
(
)
button, the minutes flashes.
•
Increase the minutes:
,
•
Decrease the minutes:
.
5.
When the correct minute is displayed, press the
ENTER
(
)
button, "
TIME
" appears in the
display.
•
The current time is now set.
•
You can display the time, even when you are using
another function, by pressing the
TIMER SET
button
once.
•
You can also use
]
or
[
on the front panel instead
of
TUNING/ALBUM
,
or
.
button in step 3,4.
Cancelling the Timer
MX-E750-E760-E761-E770-E771-0417.indd 11
2012-4-24 18:04:11
