19
EN
G
LIS
H
6. After pressing the
[＞]
button, select ’On/Off’ timer.
f
You can select On or Off by repeatedly pressing the
[∧]
/
[∨]
button .
f
When selecting ‘Off’, follow step 8 or 9 .
• You cannot use timer function for hot water mode(saving/standard/
power) when you select the use of hot water function as no use in the field
specification setting with installation of an wired remote controller or when
you use other company's water tank .
• When the use of booster heater has selection ‘no use’ in the field specification
setting with the installation of a wired remote controller, you cannot use timer
function for power hot water mode(DHW) .
NOTE
7. After pressing the
[＞]
button, select hot water mode or silent mode.
f
You can set hot water mode or silent mode by pressing the
[∧]
/
[∨]
or
Mode
button in DHW and
Silent
buttons .
• When setting hot water supply as 'No' or silent function is not supported,
selection will be limited .
NOTE
8. Complete timer function by pressing the
Set
button.
f
When additional timer is needed, re-select the setting from daily timer or weekly
timer .
9. Press the
ESC
button to exit normal mode.
• If you want to cancel daily timer while you are setting them, press the
ESC
button .
NOTE
DVM Hydro Unit_MWR-WW00_IB_EN_03648A(1).indd 19
2013-01-09 오후 2:06:27
