E-
19
ENGLISH
Locking the Part of the Wired remote controller
To prevent the wired remote controller from children and
changing settings unwillingly, you can lock some functions of
wired remote controller.
1
Press the
button for 3 seconds to enter the setup
mode.
Result:
The wired remote controller will enter the setup
mode and the menu will
display .
2
Press the
buttons and select menu .
Result:
Each time the
buttons are pressed,
menu number increases by 1.
Press the
button to enter the lock setup
mode.
Note
Press the
button to cancel the setting.
3
Using the
buttons, you can set the lock setting
value of the
,
,
,
buttons.
Result:
Lock setting value
- 0: Cancel lock
- 1: Set lock
Press the
button after setting.
4
Press the
button to complete the part lock settings.
Result:
Changed settings will be applied.
will be displayed when the lock function is
set.
Note
Press the
button to cancel the setting.
5
Press the
button.
Result:
Menu selection display will end.
Note
If the centralized control is set, you cannot use the
part lock function.
You cannot use the part lock function when Lock all
is set.
Part Lock function can be applied to
,
,
, and
buttons only.
On/off
button
Temperature
setting button
Mode button
Fan speed button
MWR-WH02_IB_E_33323-1.indd 19
2011-01-10 오후 1:13:50
