E-
17
ENGLISH
Setting the Auto Stop Function
The wired remote controller can be set to turn off the indoor
unit(s) after a set period of time has passed since any button on
the remote controller was last pressed. This function is used to
turn off the indoor unit in case the user forgets to turn off the
indoor unit.
1
Press the
button for 3 seconds to enter the setup
mode.
Result:
The wired remote controller will enter the
setup mode and the menu will display .
Press the
button to enter the Auto Stop
setup mode.
2
Press the
buttons to set the auto stop time.
Result:
Time is adjusted by 1 hour when the
buttons are pressed.
The default time setting is 0. The auto stop
time can be set between 0 and 12 hours.
If you select 0, auto stop function will be
canceled.
3
Press the
button to complete the auto stop function.
Result:
Auto stop function is set.
Note
To cancel the auto stop function, press the
button.
4
Press the
button.
Result:
Menu selection display will end.
will be displayed.
Note
The time-counting of Auto Stop function is clear
after pressing the
,
,
,
,
,
,
buttons.
Auto Stop function doesn’t work under the
centralized control.
MWR-WH02_IB_E_33323-1.indd 17
2011-01-10 오후 1:13:46
