S/W Download
7-1
7-1
■ How to download to microSD Card
1 Download the wired remote controller image, change the file name to “IMAGE.BIN,”
and then download to microSD Card.
2 Download the wired remote controller program, change the file name to
“MICOM.BIN,” and then download to microSD Card.
3 Insert the microSD Card with the Wired Remote Controller active,
and then reset the system.
For system reset, press the and buttons at the same time for more than
5 seconds.
4 The download to microSD Card is performed as follows :
- Download proceeds in the order of IMAGE and MICOM.
- When the update fails, the Wired Remote Controller is reset automatically and the update proceeds again.
5 When the download is finished, tracking starts automatically.
When tracking is completed, remove the microSD Card.
• Be sure to use the microSD Card after formatting in FAT16 or FAT32.
• The microSD Card supports the SD or SDHC with the capacity of 1 GB to 32 GB.
• The update is performed only when the file version in the microSD Card differs from the one of the Wired Remote Controller.
• When the screen is frozen for more than 3 minutes after completing the microSD card update by 100%, product
inspection is required.
• Delete the files except for the ones for download.
(Only IMAGE.BIN and MICOM.BIN are required.)
■
When the microSD Card is removed during download
1 When you remove the microSD Card during download, the “INSERT MICROSD CARD
AND SYSTEM RESET” screen appears and the download is stopped.
2 When you insert the microSD Card and press the and buttons for system reset,
download starts again after finishing the reset.
• When you reset the Wired Remote Controller while the microSD Card is removed, the above message appears on the
screen in standby mode.
• When you reset the Wired Remote Controller while the microSD Card is removed and then inserted, the following
actions are performed.
- If the reinserted microSD Card contains all the files for update, update proceeds regardless of the version of the file.
- If the reinserted microSD Card contains any missing files for update, the above message appears in standby mode.
NOTE
7. S/W Download
