E-
24
Setting the Temperature Limits
You can set upper limit/lower limit temperature so that the
desired temperature is not set too high or low.
1
Press the
button for 3 seconds to enter the setup
mode.
Result:
The multi function wired remote controller will
enter the setup mode and the menu will
display .
2
Press the
buttons and select menu .
Result:
Each time the
buttons are pressed,
menu number increases by 1.
Press the
button to enter the
temperature limit setup mode.
3
Set the lower and upper temperature limit by pressing the
buttons.
Note
Set the lower limit first by pressing the
buttons followed by the
button and set the upper limit.
Each time the
buttons are pressed,
the temperature is increased/decreased
by 1°C(1°F) .
Press the
button after setting.
Press the
button to cancel the
temperature limits setup.
4
Press the
button to complete the temperature limit
settings.
Result:
The desired temperature will be restricted
by the set lower/upper temperature limit.
Note
Press the
button to cancel the setting.
5
Press the
button.
Result:
Menu selection display will end.
Note
The lower limit can not be same or higher than upper
limit.
Even though you set the lower temperature limit to
16°C(61°F), lower temperature will be set to 18°C(65°F) in
all the modes except in heating mode. When you set the
lower temperature limit to 18°C(65°F), it will be applied
under all the operation modes.
Temperature limit is applied to 7-day schedule setting as
well.
MWR-WE00_IB_E_30794-1.indd 24
2009-06-22 ｿﾀﾈﾄ 2:37:04
Содержание MWR-WE00
Страница 27: ...E 27 ENGLISH Memo ...
Страница 28: ......
