Samsung Msys 730 Скачать руководство пользователя страница 93

Страница: 93 / 108

Troubleshooting

roubleshooting

Fax problems

Symptom

The machine is not working,
there is no display and the
buttons are not working.

Cause and Solution

• Unplug the power cord and plug it in again.

• Check your power socket is live.

No dial tone.

• Check that the phone line is connected properly.

• Check the phone socket in the wall by plugging in

another phone.

The numbers stored in the
memory do not dial correctly.

• Make sure that the numbers are stored in memory

correctly.

• Print a telephone numbers list. See page 2.42.

The document does not feed
into the machine.

• Make sure that the document is not wrinkled and you

are putting it in correctly. Check the document is the
right size, not too thick or thin.

• Make sure that the cover is firmly closed.

You cannot receive faxes
automatically.

• The FAX or TEL/FAX mode should be selected.

• Is there paper in the machine?

• Check if the display shows ‘MEMORY FULL.’

The machine will not send
anything.

• Make sure that the document is loaded face down.

• ‘TX’ should show up in the display.

• Check the other machine you are sending to, to see if

it can receive your fax.

The machine cannot receive
faxes manually.

• Did you hang up the handset before you pressed

Start/Enter

Note:

It will be applied when you have a phone connected to the
TEL jack on the back of the machine.

Fixing problems

Your problem may be listed on page 3.7 in the ‘LCD error
messages’ section. Below are other problems you can solve by
yourself. If not, call for service.

Содержание Msys 730













































































































Результаты поиска

Содержание Msys 730

Отзывы:

Похожие инструкции для Msys 730

Бренды по названию

Популярные бренды

Samsung Msys 730, Руководство пользователя

Результаты поиска

Содержание Msys 730

Отзывы:

Похожие инструкции для Msys 730

Бренды по названию

Популярные бренды