The auxiliary input can be used to take advantage of the
sound quality of your micro component system when listening
to other sources.
Examples: A
television
A video disc player
A Hi-Fi stereo video cassette recorder
To connect to the external source, the source must have an
audio output. In addition, you need an RCA connection cable.
Set the system to standby mode and disconnect it and the external
source from the main socket.
Connect the audio cable to the rear of the micro component system.
Connect the...
To the connector marked...
Red jack
R (right)
White jack
L (left)
For optimum sound quality, do not invert the right and left
channels.
Plug the system back into the main socket and press the ( )
button to switch it on.
Select the AUX source by pressing the
AUX
button.
Result:
AUX
is displayed.
Switch the external source on.
Example: You can watch a film and take advantage of stereo
sound provided that the original sound track is in
stereo (as if you were in a cinema).
1
2
3
4
5
Directions in Installing Speaker
Installation in a place near heating apparatus, under direct lay of
light or with high humidity may cause performance degradation
of the speaker.
Do not install on the wall or on a high place of pole or other
unstable place to prevent any safety accident caused by falling
of the speaker.
Do not take the speaker apart from TV or computer monitor.
The speaker near the TV or computer monitor may influence the
quality of the screen display.
Main Speaker Connection: Connect the Speaker cords
(red/black) to the Main Speaker jacks of System.
Connecting MAIN Speaker
: Use the MAIN speaker connection
cable (Red/White) to connect the
MAIN speaker.
Red wire to the R terminals
White wire to the L terminals
Connecting Subwoofer Speaker
: Use the subwoofer speaker
connection cable (Black/Violet)
to connect the SUBWOOFER
speaker.
This unit can output CD digital sound signals through this
jack. Use an optical cable to connect digital audio
equipment. (DAT deck, MD recorder, etc.). Remove the dust
cap (1) from the CD DIGITAL OUT jack. Then, connect an
optical cable plug to the CD DIGITAL OUT jack.
When the CD DIGITAL OUT jack is not being used.
Attach the supplied dust cap.
CD Digital Out Jack
(1)
8
GB
Connecting to an External Source
Speaker Connection
MAIN
110v~
127v
220v~
240v
(Right Speaker)
(Left Speaker)
MM-ZJ9-GB(DAB)-RDS 11/12/04 8:33 Page 8
