background image

CD

CD

CD

VOL.

VOL

Tuning

Mode

CD

CD

Band

TUNER

On/Standby

Volume

EQ

Preset

S.BASS

Down

Up

REC/Pause

TAPE

CD

AUX

Tuning Mode

CD

GB

6

Your system is equipped with a clock which allows you to turn
your system on and aff automatically. You should set the clock:

When you purchase the Micro component system

After a power failure

After unplugging the unit

For each step, you have a few seconds to set the required
options. If you exceed this time, you must start again.

1

Switch the system on by pressing On/Standby.

2

Press Timer/Clock twice.
Result:

CLOCK is displayed.

3

Press Program/Set.
Result:

The hour flashes.

4

To...

Press...

Increase the hours
Decrease the hours

5

When the correct hour is displayed, press Program/Set.
Result:

The minutes flash.

6

To...

Press...

Increase the minutes
Decrease the minutes

7

When the correct time is displayed, press Program/Set.
Result:

The clock starts and is displayed, even when the
system is in standby mode.

You can display the time, even when you are using another
function, by pressing Clock once. 

You can play 12 cm or 8 cm compact discs without an adapter.

1

Select the CD function by pressing CD on the front panel.

2

Open the compact disc compartment by pressing down and
releasing the cover.

3

Place your disc in the compartment, with the label on the disc
facing upwards.

4

Close the compartment by pushing down on the cover until it
clicks into place.
Result:

The display indicates the number of tracks on the
disc.

5

Press the PLAY/PAUSE (

) button.

Result:

The first track on the disc plays and the track
number is displayed.

6

To stop playback temporarily, press the PLAY/PAUSE (

)

button.

Press PLAY/PAUSE (

) again to continue playing

the disc.

7

To start playing 

Press...

at the beginning of...

The next track

SKIP/SEARCH 

once

The current track

SKIP/SEARCH 

once

The previous track

SKIP/SEARCH 

twice

The track of your choice

SKIP/SEARCH 

or 

the appropriate number of times

8

To search through 

Press and  hold down...

the tracks...

Forwards

SKIP/SEARCH until 

you 

reach the required point

Backwards

SKIP/SEARCH until 

you 

reach the required point

You are advised to turn the volume down before using
this function.

9

Press the STOP (

) button when you have finished.

Setting the Clock

CD

CD

VOL.

VOL.

Tuning

Mode

On/Standby

Timer

On/Off

EQ  Preset

Power

Sound

Sleep

CD Repeat Mono/ST.

TUNER

Program

/Set

AUX

Timer/

Clock

y

CD

CD

2

1

7

4

4

6

6

3 5

2 4

1

9

7

7

8

8

9

5 6

Listening to a Compact Disc

Содержание MM-N4






















Отзывы: