Samsung MM-KC10, Инструкция по эксплуатации

Страница: 9 / 40

16 15
2
Load a disc.
• Place a disc gently into the tray with the disc’s label
facing up.
•
Depending on the content of the disc, the initial screen may appear different.
•
Depending on the recording mode, some MP3-CDs cannot be played.
•
Table of contents of a MP3-CD varies depending on the MP3 track format recorded
on the disc.
1
Press OPEN/CLOSE button to open the
disc tray.
3
Press OPEN/CLOSE button to close the disc
tray.
DVD VCD CD
•
Playback starts automatically.
DivX MP3 JPEG
•
Playback starts automatically.
•
If the TV is on, a list of MP3s on
the CD will appear on the TV
screen.
Note
•
To resume playback, press PLAY/PAUSE
button again.
To temporarily pause playback,
press
PLAY/PAUSE during playback.
•
If pressed once, “ PRESS PLAY ” is displayed and the
stop position will be stored in memory. If PLAY/PAUSE
( ) button or ENTER button is pressed, playback
resumes from the stop position. (This function works
only with DVDs.)
•
If pressed twice, “STOP” is displayed, and if
PLAY/PAUSE ( ) button is pressed, playback
starts from the beginning.
To stop playback,
press
STOP during playback.
OPERA
TION
Turn off the main unit and then press and hold NT/PAL on the Remote Control for over 5 seconds.
•
By default, the video format is set to "PAL".
•
Each time the button is pressed, the video format switches between "NTSC" and "PAL".
•
Each country has a different video format standard.
•
For normal playback, the video format of the disc must be the same as the video format of your TV.
Selecting the Video Format
Disc Playback
•
The various functions available are listed in turn on the display.
•
All these functions are described in detail in this booklet.
For instructions on how to use them, refer to the appropriate
sections.
DEMO Function
You can view the various functions available on your system.
To cancel this function, press
DEMO/DIMMER again.
Press and hold DEMO/DIMMER
button.
•
Each time the button is press, the brightness changes as
follows:
DIMMER ON(Dim)
➞
DIMMER OFF(Bright) .
DIMMER Function
You can adjust the brightness of the display
on the main unit.
Press DEMO/DIMMER button.
DEMO / DIMMER Function