6
English
English
7
Rear Panel
1.
ONLY FOR SERVICE
•
This jack is for service only. Please do not use.
2.
FM Antenna Connector Terminal
1.
Connect the FM antenna (supplied) to the FM
Antenna jack.
2.
Slowly move the antenna wire until you find a
location where reception is good, then fasten
it to a wall or other rigid surface.
3.
If reception is poor, you may need to install an
outdoor antenna. To do so, connect an
outdoor FM antenna to FM antenna jack on
the rear of the system using a 75Ω coaxial
cable (not supplied).
3.
2.0 CH Speaker Connector Terminals
The speaker connector terminals are located on
the rear of the system.
1.
To achieve the correct sound quality, insert the
speaker connector cables identified below into
the correct speaker terminals on the back of
the system.
•
Left speaker (marked L).
•
Right speaker (marked R).
2
3
1
02875C-MM-J320-XN-ENG-20150701.indd 7
2015/7/20 9:02:40
