ENG
19
Connecting the FM Antennas
20
CONNECTIONS
1
Connect the FM antenna supplied to the FM COAXIAL Jack.
2
Slowly move the antenna wire around until you find a location where reception is good, then fasten it
to a wall or other rigid surface.
• This unit does not receive AM broadcasts.
Note
The cooling fan supplies cool air to the unit to prevent overheating.
Please observe the following cautions for your safety.
• Make sure the unit is well-ventilated. If the unit has poor ventilation, the
temperature inside the unit could rise and may damage it.
• Do not obstruct the cooling fan or ventilation holes. (If the cooling fan or
ventilation holes are covered with a newspaper or cloth, heat may build up
inside the unit and fire may result.)
Cooling Fan
Setting the Clock
For each step, you have a few seconds to set the required options.
If you exceed this time, you must start again.
•
"CLOCK"
is displayed.
2
Press
TIMER/CLOCK
twice.
1
Switch the system on
by pressing
POWER
button.
•
"TIMER"
appears in the display.
•
The current time is now set.
5
When the correct
time is displayed,
press
ENTER
.
•
Increase the minutes :
•
Decrease the minutes :
4
When the correct
hour is displayed,
press
ENTER
.
The minutes flash.
•
Increase the hours :
•
Decrease the hours :
3
Press
ENTER
.
The hour flashes.
•
You can display the time, even when you are using another
function, by pressing
TIMER/CLOCK
once.
•
You can also use
on the main set instead of
buttons in step 3,4.
Note
FM Antenna (supplied)
MM-C430D-C530D-i-EUR-ENG-1-NO.indd 22-23
MM-C430D-C530D-i-EUR-ENG-1-NO.indd 22-23
2010-3-10 15:41:34
2010-3-10 15:41:34
