Samsung ML--6100 Скачать руководство пользователя страница 2

Страница: 2 / 106

Trademark Notices

•ML-6100, ML-6100N and Samsung logo are trademarks of Samsung Electronics Co., Ltd.

•Centronics is a registered trademark of Centronics Data Computer Corporation.

•HP, PCL5e, and PCL6 are registered trademarks of Hewlett-Packard Company.

•IBM, IBM PC, XT, AT, PS/2 are registered trademarks of International Business Machines

Corporation.

•Apple, AppleTalk, TrueType, Laser Writer, Macintosh, and LocalTalk are registered trademarks

of Apple Computer, Inc.

•Microsoft, MS-Windows, and MS-DOS are registered trademarks of Microsoft Corporation.

•PostScript, is a registered trademarks of Adobe Systems, Inc.

•CompuServe is a registered trademark of CompuServe Inc.

•All other brand or product names are trademarks or registered trademarks of their respective

companies or organizations.

Copyright

This manual is provided for information purposes only. All information included herein is
subject to change without notice. Samsung Electronics is not responsible for any damages, direct
or indirect, arising from or related to use of this manual.

Содержание ML--6100











































































































Результаты поиска

Содержание ML--6100

Отзывы:

Бренды по названию

Популярные бренды

Samsung ML--6100, Руководство пользователя

Результаты поиска

Содержание ML--6100

Отзывы:

Бренды по названию

Популярные бренды