Samsung ML-451 ND Series Скачать руководство пользователя страница 144

Страница: 144 / 241

4. Alignment and Troubleshooting

► Error Code

C1–1110

► Error message

Prepare new toner cartridge.

► Symptom

The remaining toner in cartridge is low.

► Troubleshooting method

Check the life remaining of the toner cartridge.
If its life is at the end, turn the machine off and replace the toner cartridge with new one.

► Error Code

C1–1120

C1–1140

► Error message

Replace with new toner cartridge.

End of life, Replace with new toner cartridge.

► Symptom

The remaining toner in cartridge is empty.

► Troubleshooting method

Check the life remaining of the toner cartridge.
If its life is at the end, turn the machine off and replace the toner cartridge with new one.

► Error Code

C1–1311

► Error message

Toner Cartridge Failure: #C1-1311. Install toner cartridge again.

► Symptom

The imaging unit does not get enough toner from the toner cartridge.

► Troubleshooting method

1) Turn the machine off then on.

2) Remove the toner cartridge.

Thoroughly roll the cartridge three or four times to distribute the toner evenly inside the cartridge. And reinstall
the toner cartridge.

3) Try to print out the sample page more than 20 pages.

4) Check the toner cartridge.

•

Check if the toner cartridge is installed correctly.

•

Check if the toner seal is removed perfectly.

•

Check if the toner supply shutter between the toner cartridge and the imaging unit works normally.

5) Replace the toner cartridge. Print out the sample page.

6) Check if the toner supply motor works normally.

4-43

Содержание ML-451 ND Series














































































































































































































































Результаты поиска

Содержание ML-451 ND Series

Отзывы:

Похожие инструкции для ML-451 ND Series

Бренды по названию

Популярные бренды

Samsung ML-451 ND Series, Руководство по обслуживанию

Результаты поиска

Содержание ML-451 ND Series

Отзывы:

Похожие инструкции для ML-451 ND Series

Бренды по названию

Популярные бренды