Using Print Materials
4.6
To open the rear cover:
1
Open the rear cover by pulling it down. The cover
functions as the output tray.
C
AUTION
:
The fusing area inside the rear cover of your
printer becomes very hot when in use. Take care not to burn
your fingers when you access this area.
2
Pull the extender to extend the rear cover to its full-length
position to hold longer paper.
3
If you do not want to stack the printed pages on the rear
cover, slide the extender to its place and close the tray.
The pages will stack on the output tray.
N
OTE
: The rear cover can hold up to 100 sheets of paper. If
the cover is overloaded with printed pages, it may fall from the
printer. Remove the pages so that the cover is not overloaded.
Printing on Special Print
Materials
Printing on Envelopes
1
Open the Multi-Purpose Tray and pull the extender.
2
Open the rear cover and pull the extender.
Guidelines
• Only use envelopes recommended for laser printers. Before
loading envelopes in the Multi-Purpose Tray, make sure that
they are undamaged and are not stuck together.
• Load envelopes into the Multi-Purpose Tray only.
• Do not feed stamped envelopes.
• Never use envelopes with clasps, snaps, windows, coated
lining, or self-stick adhesives. These envelopes may severely
damage the printer.
