manualshive.com logo in svg

Samsung ML-331 Series, Руководство пользователя

Поделиться
Скачать
Samsung ML-331 Series Скачать руководство пользователя страница 120

Printing quality problems

111

6. Troubleshooting

Vertical lines

If black vertical streaks appear on the page:

• The surface (drum part) of the toner cartridge inside the machine has probably been scratched. Remove the 

toner cartridge and install a new one.

If white vertical streaks appear on the page:

• The surface of the LSU part inside the machine may be dirty. Clean the inside of your machine. If these steps do 

not correct the problem, contact a service representative.

Black background

If the amount of background shading becomes unacceptable:

• Change to a lighter weight paper.

• Check the environmental conditions: very dry conditions or a high level of humidity (higher than 80% RH) can 

increase the amount of background shading.

• Remove the old toner cartridge and install a new one.

Toner smear

• Clean the inside of the machine.

• Check the paper type and quality.

• Remove the toner cartridge and install a new one.

Condition

Suggested Solutions

Содержание ML-331 Series





















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды