20
ENGLISH
DOUBLE QUANTITY PAD PROGRAMMING
Double Quantity Factor Editing
Feature
Key Entry
Display
Remark
Double
Quantity
Factor
Edit
Hold down (
) and
then
( ) pad
Hold down for 2 sec.
Code No.
After 1 sec, default value
shows in the display
window.
(Input desired factor
value.)
1.00 ~ 9.99 available
(Change the factor if
required.)
START(
)
If you don’t want to
change more, press
CANCEL to exit the
editing mode.
New Code No.
Skip this step if not
necessary.
(Input factor value)
Skip this step if not
necessary.
START(
)
Skip this step if not
necessary.
CANCEL(
)
(Mode cancel)
This exits the editing
mode.
HOW TO OPERATE DOUBLE QUANTITY PAD
1.
Press the Double Quantity pad.
2.
Press the desired memory NUMBER pad.
Result :
Cooking time which was multiplied
by the preset factor appears in the
display and cooking starts with time
digits counting down.
PROGRAMMING AIR FILTER CLEAN TIME
After having finished memory programming, just press the NUMBER pad
of the memory number you want to select. The oven will automatically start
heating according to the pre-programmed cooking time and power level.
1.
Hold down
PROGRAM LOCK
and then press
NUMBER 3
pad. Hold
together for 2 seconds.
Result :
The display will show the length of
time in hours between cleaning the
air filter you have programmed in
or the original time preset by the
manufacturer.
Default clean time is 500 hours in terms of pure oscillating time, not the
continuity time.
2.
Press
NUMBER
pads to set the desired clean time.
You can set up to 999 hours.
MJ26A6013AT_EU_DE68-02570D-00_EN.indd 20
MJ26A6013AT_EU_DE68-02570D-00_EN.indd 20
24/3/2021 3:10:13 PM
24/3/2021 3:10:13 PM
