14_
operating
operating basic function
TURNING THE AIR CONDITIONER ON AND OFF
Press the
Power
button on the remote control.
You will hear a ringing sound and the air flow blade will move up and
down automatically when the air conditioner is properly on.
The air conditioner will operate in the most recent operation mode
used or Auto mode.
When you turn off the air conditioner, air flow blade will stop moving
and remain closed.
Turning on/off your air conditioner without the remote control.
You can operate your air conditioner by pressing the
Power
button on the right bottom side of the
air conditioner.
SELECTING OPERATION MODE
Auto
In Auto mode, the air conditioner will automatically set the temperature and fan speed depending
on the room temperature detected by the room temperature sensor.
1.
Turn on the air conditioner.
Press the
Power
button on the remote control.
2.
Set the operating mode.
Press the
Mode
button on the remote control until
Auto mode and Auto fan speed indicator appear on the
remote control display.
The air conditioner will automatically set the operation
mode to Cool or Heat depends on the room temperature.
Each time you press the
Mode
button, the mode will change in order of Auto, Cool, Dry,
Fan and Heat.
3.
Adjust the temperature (if you need to increase or
decrease the room temperature).
Press the
Temp
or
button on the remote control
to increase or decrease the desired temperature.
You can set the desired temperature between the
range of 16˚C~30˚C.
You can increase/decrease the temperature by 1˚C.
•
While you are using the remote control, make sure correct indicator which matches your
selection appears on the remote control display.
•
Air flow can be adjusted manually (see page 19 for instructions).
FJM Vivaldi_IB_E_31202A_10.27.09.indd 14
2009-10-27 16:35:28
