7
General information
#1 and #2 Phillips
screwdriver
Pencil
Ruler or tape measure and
straight edge
Carpenter square (optional)
Tin snips
(for cutting damper,
if required)
Scissors
(to cut template,
if necessary)
Electric drill with
3
/
16
˝,
½˝ and ⅝˝ drill bits
Filler blocks or scrap wood
pieces, if needed for top
cabinet spacing (used on
recessed bottom cabinet
installations only)
Gloves
Saw (saber, hole or keyhole)
Stud finder or Hammer
(optional)
Safety goggles
Level
Duct and masking tape
TOOLS YOU WILL NEED
16 ¹⁵∕₁₆˝
30˝
5˝
30˝ min.
Bottom edge of the
cabinet needs to be
30˝ or more from the
cooking surface.
Backsplash
12˝ max.
NOTES:
• The space between the cabinets must be 30˝ wide and
free of obstructions.
• This microwave oven is for installation over ranges up
to 36˝ wide.
• If you are going to vent your microwave oven to the
outside, see the Hood Exhaust Section for exhaust
duct preparation.
•
If installing the microwave oven beneath smooth
flat cabinets, be careful to follow the instructions
on the top cabinet template for power cord
clearance.
• Maximum cabinet depth above and beside the
unit is 12˝.
• The dimensions provided are the minimum
required for mounting the microwave oven. Local
codes and the practical use of the range will
likely require you to provide more than the 13.5˝
shown between the range and the bottom of the
microwave.
MOUNTING SPACE
SMH1927_XAC_DE68-04108B-06_EN+CFR.indb 7
SMH1927_XAC_DE68-04108B-06_EN+CFR.indb 7
2022-01-20 �� 10:19:08
2022-01-20 �� 10:19:08
