19
English
PREP
ARA
TION
Check before use
Module or group operation
Module/group operation is to combine multiple units in modules or groups of a single
water pipe system and to operate them depending on the working condition.
F3, F4
Module control
Main
Main
Main
Main
Group 1
Group 2
Sub
Sub
Sub
Sub
Module 1
Module 2
Module 3
Module 4
Unit 0
Unit 7
y
A single module control can control a maximum of 16 DVM CHILLERs (0 ~ 15).
– DVM CHILLER can have a maximum of 8 modules (1 ~ 8) and 4 groups (1 ~4).
– A maximum of 8 units can be connected to a module, and a maximum of 8 modules
can be connected to a group.
y
Depending on the working condition below, set modules or groups.
– A module or a group must be connected to a single water pipe.
– When modules are controlled by a group, the modules cannot operate themselves and
the display will not show the modules during the module operation.
y
You can select an operation mode, a pattern operation (according to distribution method
of compressor capacity) and an applied operation by each module or group.
Содержание MCM-A00UN
Страница 51: ...51 English SETTING Memo ...
Страница 52: ......