GB
12
You can view the various functions available on your system.
Press the Demo button.
Result: The various functions available are listed in turn on the dis-
play.
All these functions are described in detail in this booklet.
For instructions on how to use them, refer to the appropriate
sections.
To cancel this function, press Demo again.
If the temperature of the set is too higher, the Volume will be
adjust till VOL. 20 automatically.
Your system is equipped with a clock which allows you to
turn your system on and off automatically. You should set the
clock:
When you first purchase the mini-compact system
After a power failure
After unplugging the unit
Remember to reset the clock when the time changes from
regular to daylight savings and vice verse.
For each step, you have a few seconds to set the required
options. If you exceed this time, you must start again.
Switch the system on by pressing On/Standby.
Press Timer/Clock twice.
Result:
CLOCK
is displayed.
Press Enter.
Result: The hour flashes.
To...
Turn the
Multi Jog
knob to the...
Increase the hours
Right
Decrease the hours
Left
When the correct hour is displayed, press Enter.
Result: The minutes flash.
To...
Turn the
Multi Jog
knob to the...
Increase the minutes
Right
Decrease the minutes
Left
When the correct time is displayed, press Enter.
Result: The clock starts and is displayed, even when the system is in
standby mode.
You can display the time, even when you are using another func-
tion, by pressing
Timer/Clock
once.
Setting the Clock
Viewing the Various Functions on
Your System
2
1
1
2
3
4
5
6
7
1
2
4,6
3,5,7
