Samsung MagicLAN SWL-2000N, Руководство пользователя

Страница: 62 / 77

61
CMD: set AP_name WLAN_AP (Access Point Name)
CMD: set channel 1 (RF channel)
CMD: set IP_address 123.45.67.8 (origin IP of the AP)
CMD: set gateway 123.45.67.1
CMD: set mode structurenet
CMD: set Telnet on/off (for telnet connection)
CMD: set Web on/off (for http connection)
CMD: set standard on (for interoperability)
4. After you set all the parameters for your system, execute “ restart ” command to make the changes
take effects.
5. Now your AP is ready to be used.
6.4 Parameter Setup
•
RADIO RELATED
channel : This field specifies the operating channel for the SWL-2000AP. The SWL-2000AP allows from 1
to 13 but the channels used by adjacent AP should be apart by more than 5 channels. For example, if an AP
uses channel 1, the adjacent AP should use channel 6 or higher for the best output.
Default: 1
RTS_threshold : This field determines the size of RTS(Request-To-Send)/CTS(Clear-To-Send) frames and
the frames to be used.
Default: 2301
short_retry : This field specifies the number of transmissions of RTS/CTS to be attempted before aborting
when the communication between clients is interfered. Note that RTS/CTS are delivered back and forth
between the clients to monitor the channel for the possibility of communications.
Default: 15
long_retry : This field specifies the number of trials of data transmission when the channel or a client causes
the cease of data transmissions.
Default: 15
Standard : This field is used for interoperability between multiple IEEE 802.11 venders.
Default: on