20
1. Introduction
Installing the driver locally
A locally connected machine is a machine directly attached to your computer
using the cable. If your machine is attached to a network, skip the following
steps below and go on to installing a network connected machine’s driver (see
Advanced Guide).
•
If you are a Macintosh or Linux OS user, refer to the "Software installation"
on page 1.
•
The installation window in this
User’s Guide
may differ depending on the
machine and interface in use.
•
Selecting
Custom Installation
allows you to choose which programs to
install.
•
Only use a USB cable no longer than 3 meters (118 inches).
12
Windows
1
Make sure that the machine is connected to your computer and
powered on.
If the “
Found New Hardware Wizard
” appears during the installation
procedure, click
Cancel
to close the window.
2
Insert the supplied software CD into your CD-ROM drive.
The software CD should automatically run and an installation window
will appear.
3
Select
Install Now
.
4
Read
License Agreement
, and select
I accept the terms of the License
Agreement
. Then, click
Next
.
5
Follow the instructions in the installation window.
Содержание M-202X series
Страница 45: ...Replacing the toner cartridge 45 3 Maintenance ...
Страница 48: ...Cleaning the machine 48 3 Maintenance ...
Страница 55: ...Clearing paper jams 55 4 Troubleshooting If you do not see the paper in this area stop and go to next step ...
Страница 78: ...Regulatory information 78 5 Appendix 20 China only ...