manualshive.com logo in svg

Samsung LW30A23W, Инструкция пользователя


Поделиться
Скачать
background image

English-2

Information in this document is subject to change without notice.

© 2003 Samsung Electronics Co., Ltd. All rights reserved.

Reproduction in any manner whatsoever without the written permission of Samsung Electronics Co., Ltd. is strictly forbidden.
Samsung Electronics Co., Ltd. shall not be liable for errors contained herein or for incidental or consequential damages in
connection with the furnishing, performance, or use of this material.
The 

Samsung logo

is the registered trademarks of Samsung Electronics Co., Ltd.; 

Microsoft

, 

Windows®

and 

Windows® NT

are

registered trademark of Microsoft Corporation; 

VESA

, 

DPMS

and 

DDC

are registered trademarks of Video Electronics Standard

Association. All other product names mentioned herein may be the trademarks or registered trademarks of their respective owners.

Plug and Play

The adoption of the new 

VESA®

Plug and Play solution eliminates complicated and time consuming setup. It allows you to install

your set in a Plug and Play compatible system without the usual hassles and confusion. Your computer system can easily identify
and configure itself for use with your set. Your set automatically tells the computer system its 

E

xtended 

D

isplay 

I

dentification 

D

ata

(EDID) using 

D

isplay 

D

ata 

C

hannel (DDC) protocols so the computer system can automatically configure itself to use your set. 

Power Saver

This set is 

EPA Energy Star®

compliant when used with a computer equipped with 

VESA DPMS

functionality. 

For energy conservation, turn your set Off when you are not using it or when leaving it unattended for long periods.

European Notice (Europe Only)

Products with the CE Marking comply with both the EMC Directive (89/336/EEC), (92/31/EEC), (93/68/EEC) and the Low
Voltage Directive (73/23/EEC) issued by the Commission of the European Community. Compliance with these directives
implies conformity to the following European Norms:

■

EN55022:1998+A1:2000 - Radio Frequency Interference

■

EN55024:1998 - Electromagnetic Immunity

■

EN55013:1990+A12:1994+A13:1996+A14:1999 - Radio Frequency Interference

■

EN55020:1994+A11:1996+A12/A13/A14:1999 - Electromagnetic Immunity

■

EN61000-3-2:1995+A1/A2:1998 - Power Line Harmonics

■

EN61000-3-3:1995 - Voltage Fluctuations

■

EN60065:1997 or EN60950:1998 - Product Safety

BN68-448D-03Eng-final  12/19/03 10:45 PM  Page 2

Содержание LW30A23W


































































Отзывы:

Нет отзывов

Похожие инструкции для LW30A23W

Panasonic TX-50DXW804 Operating Instructions Manual preview
TX-50DXW804
Бренд: Panasonic Страницы: 88
Panasonic TC-32LX85 Operating Manual (English Operating Instructions Manual preview
TC-32LX85 Operating Manual (English
Бренд: Panasonic Страницы: 50
Samsung LN32A550P3F Quick Setup Manual preview
LN32A550P3F
Бренд: Samsung Страницы: 24
Samsung LN26A330J1D Quick Setup Manual preview
LN26A330J1D
Бренд: Samsung Страницы: 24
Samsung LN19B360C5D Quick Setup Manual preview
LN19B360C5D
Бренд: Samsung Страницы: 20
Samsung LN-T4642H Owner'S Instructions Manual preview
LN-T4642H
Бренд: Samsung Страницы: 147
Samsung LN-T1953H Owners Instrucitons preview
LN-T1953H
Бренд: Samsung Страницы: 89
Samsung LN-R237W Manual De Instrucciones preview
LN-R237W
Бренд: Samsung Страницы: 88
Samsung LED 7500 series Quick Start Manual preview
LED 7500 series
Бренд: Samsung Страницы: 2
Samsung LED 7500 series User Manual preview
LED 7500 series
Бренд: Samsung Страницы: 102
Samsung LE26A41B Quick Setup Manual preview
LE26A41B
Бренд: Samsung Страницы: 6
Samsung HL-S5088W - 50" Rear Projection TV Manual De Instrucciones preview
HL-S5088W - 50" Rear Projection TV
Бренд: Samsung Страницы: 164
Samsung HL-R5688W - 56" Rear Projection TV Manual De Instrucciones preview
HL-R5688W - 56" Rear Projection TV
Бренд: Samsung Страницы: 144
Samsung HL-P5063W Quick Manual preview
HL-P5063W
Бренд: Samsung Страницы: 2
Samsung HL-R5678W - 56" Rear Projection TV Manual De L'Utilisateur preview
HL-R5678W - 56" Rear Projection TV
Бренд: Samsung Страницы: 144
Samsung LED 6400 series User Manual preview
LED 6400 series
Бренд: Samsung Страницы: 26
Samsung LN32C530F1F User Manual preview
LN32C530F1F
Бренд: Samsung Страницы: 41
Panasonic Viera TH-65PZ750 Manual De Instrucciones preview
Viera TH-65PZ750
Бренд: Panasonic Страницы: 59

Бренды по названию

Популярные бренды

Загрузить еще бренды