Samsung LT20A350, Руководство по обслуживанию

Страница: 17 / 76

2-11
2. Product specifications
„
Switching between Devices
1. Press the TOOLS button, then select
(HDMI-CEC)
.
2. devices connected to the TV are listed in Device List.
N
If you cannot find a device you want, press the
A
button to refresh the list.
3. Select a device and press the ENTERE
E
button. You can switch to the selected device.
N
Only when you set (HDMI-CEC) to On in the System menu, the Device List menu appears.
●
Switching to the selected device may take up to 2 minutes. You cannot cancel the operation during the
switching operation.
●
If you have selected external input mode by pressing the
SOURCE
button, you cannot use the
function. Make sure to switch to an device by using the Device List .
„
Recording
You can make a recording of a TV Programme using a Samsung recorder.
1. Select
Recording
.
N
When there are more than two recording devices
●
When multiple recording devices are connected, the recording devices are listed. Select one recording
device in the Device List.
●
When the recording device is not displayed, select Device List and press the
A
button to searchdevices.
2. Press the
EXIT
button to exit.
N
You can record the source streams by selecting Recording: (device_name).
N
Pressing the ∏ (REC) button will record whatever you are currently watching. If you are watching video from
another device, the video from the device is recorded.
N
Before recording, check whether the antenna jack is properly connected to the recording device. To properly
connect an antenna to a recording device, refer to the recording device’s users manual.
„
Listening through a Receiver
You can listen to sound through a receiver (i.e Home Theatre) instead of the TV speaker.
1. Select Receiver and set to On .
2. Press the
EXIT
button to exit.
N
If your receiver supports audio only, it may not appear in the device list.
N
The receiver will work when you have properly connected the optical in jack of the receiver to the DIGITAL
AUDIO OUT (OPTICAL) jack of the TV.
N
When the receiver (i.e Home Theatre) is set to On , you can hear sound output from the TV’s Optical jack.
When the TV is displaying a DTV (air) signal, the TV will send out 5.1 channel sound to the receiver. When
the source is a digital component such as a DVD and is connected to the TV via HDMI, only 2 channel sound
will be heard from the receiver.
N
NOTE
●
You can only control devices using the TV remote control, not the buttons on the TV.
●
The TV remote control may not work under certain conditions. If this occurs, reselect the device.
●
The functions do not operate with other manufacturers’ products.