Samsung LT20A350, Руководство по обслуживанию

Страница: 18 / 76

2-12
2. Product specifications
„
Troubleshooting for
Problem Possible Solution
does not work.
• Check if the device is an device. The system supports
devices only.
• Only one receiver (home theatre) can be connected.
• Check if the device power cord is properly connected.
• Check the device’s Video/Audio/HDMI cable connections.
• Check whether
(HDMI-CEC)
is set to
On
in the
System
menu.
does not work.
• Check whether the TV remote control is in
TV
mode.
• Check whether the remote control is compatible.
• does not work in certain situations. (Searching channels, operating
My
Downloads
or
Plug & Play
(initial setup), etc.)
• When connecting or removing the HDMI cable, please make sure to search devices
again or turn your TV off and on again.
• Check if the Function of device is set on.
I want to start .
• Check if the device is properly connected to the TV and check if the
(HDMI-CEC)
is set to
On
in the
System
menu.
• Press the TOOLS button to display the menu and select a menu you want.
I want to exit .
• Select
View TV
in the menu.
• Press the SOURCE button on the TV remote control and select a device other than
devices.
• Press
<
CH
>
, CH LIST , PRE-CH, and FAV.CH to change the TV mode. (Note that
the channel button operates only when a tuner-embedded device is not
connected.)
The message
"Connecting to
device..."
appears on the
screen.
• You cannot use the remote control when you are configuring or switching to
a view mode.
• Use the remote control when the setting or switching to view mode is
complete.
The device does not
play.
• You cannot use the play function when
Plug & Play
(initial setup) is in progress.
The connected device is not
displayed.
• Check whether or not the device supports functions.
• Check whether or not the HDMI cable is properly connected.
• Check whether
(HDMI-CEC)
is set to
On
in the
System
menu.
• Search devices again.
• You can connect an device using the HDMI cable only. Some HDMI cables
may not support functions.
• If it is terminated by an abnormal situation such as disconnecting the HDMI cable or
power
cord or a power failure, please repeat the device scan.
The TV Programme cannot be
recorded.
• Check whether the antenna jack on the recording device is properly connected.
The TV sound is not output
through the receiver.
• Connect the optical cable between TV and the receiver.