43
English
04
Advanced Featur
es
Listening through a Receiver
¦
You can listen to sound through a receiver (i.e Home Theater) instead of the TV speaker.
1.
Select
Receiver
and set to
On
.
2.
Press the
EXIT
button to exit.
If your receiver supports audio only, it may not appear in the device list.
The receiver will work when you have properly connected the optical in jack of the receiver to the
DIGITAL AUDIO
OUT (OPTICAL)
jack of the TV.
When the receiver (i.e Home Theater) is set to On, you can hear sound output from the TV’s Optical jack. When
the TV is displaying a DTV (air) signal, the TV will send out 5.1 channel sound to the receiver. When the source is a
digital component such as a DVD and is connected to the TV via HDMI, only 2 channel sound will be heard from
the receiver.
NOTE
You can only control devices using the TV remote control, not the buttons on the TV.
The TV remote control may not work under certain conditions. If this occurs, reselect the device.
The functions do not operate with other manufacturers’ products.
Troubleshooting for
¦
Problem
Possible Solution
does not work.
Check if the device is an device. The system supports devices only.
Ř
Only one receiver (home theater) can be connected.
Ř
Check if the device power cord is properly connected.
Ř
Check the device’s Video/Audio/HDMI cable connections.
Ř
Check whether
Ř
(HDMI-CEC)
is set to
On
in the setup menu.
Check whether the TV remote control is in TV mode.
Ř
Check whether the remote control is compatible.
Ř
does not work in certain situations. (Searching channels, operating
Ř
Media Play
or
Plug & Play
(initial setup), etc.)
When connecting or removing the HDMI cable, please make sure to search devices again or turn your
Ř
TV off and on again.
Check if the Function of device is set on.
Ř
I want to start .
Check if the device is properly connected to the TV and check if the
Ř
(HDMI-CEC)
is
set to
On
in the Setup menu.
Press the
Ř
TOOLS
button to display the menu and select a menu you want.
I want to exit .
Select
Ř
View TV
in the menu.
Press the
Ř
SOURCE
button on the TV remote control and select a device other than devices.
Press
Ř
>
CH
<
,
CH LIST
,
PRE-CH
, and
FAV.CH
to change the TV mode. (Note that the channel
button operates only when a tuner-embedded device is not connected.)
The message ‘Connecting to
device...’ appears on
the screen.
You cannot use the remote control when you are configuring or switching to a view mode.
Ř
Use the remote control when the setting or switching to view mode is complete.
Ř
The device does not
play.
You cannot use the play function when
Ř
Plug & Play
(initial setup) is in progress.
The connected device is not
displayed.
Check whether or not the device supports functions.
Ř
Check whether or not the HDMI cable is properly connected.
Ř
Check whether
Ř
(HDMI-CEC)
is set to
On
in the setup menu.
Search devices again.
Ř
You can connect an device using the HDMI cable only. Some HDMI cables may not support
Ř
functions.
If it is terminated by an abnormal situation such as disconnecting the HDMI cable or power cord or a
Ř
power failure, please repeat the device scan.
The TV Program cannot be
recorded.
Check whether the antenna jack on the recording device is properly connected.
Ř
The TV sound is not output
through the receiver.
Connect the optical cable between TV and the receiver.
Ř
The ARC function allows digital audio to output via the
Ř
HDMI IN 2(ARC)
port. It can be enabled only
when the TV is connected with an audio receiver that supports the ARC function.
BN68-02584A_Eng.indb 43
2010-08-31
9:17:04
