Samsung LN46A850 Скачать руководство пользователя

Страница: 77 / 155

English - 7

WISELINK Pro

Using the WISELINK Pro Function

Connecting a USB Device

LN46A850S1F and LN52A850S1F only have one USB port.
LN46A860S2F and LN52A860S2F have two USB ports.

You can view movies and photos and listen to music files stored on a USB Mass

Storage Class (MSC) device.

Press the

POWER

button on the remote control or front panel.

The TV is powered on.

Connect a USB device containing JPEG, MP3 and/or Movie files to the

WISELINK jack (USB jack) on the side of the TV.

If you enter the WISELINK Pro mode with no USB device connected the

message “No external storage device found. Check the connection status.”

will appear. In this case, insert the USB device, exit the screen by pressing

the

W.LINK

button on the remote control and enter the WISELINK Pro screen

again.

MTP (Media Transfer Protocol) is not supported.

The file system only supports FAT16/32 (The NTFS file system is not

supported).

Certain types of USB Digital camera and audio devices may not be

compatible with this TV.

WISELINK Pro only supports USB Mass Storage Class devices (MSC). MSC

is a Mass Storage Class Bulk-Only Transport device. Examples of MSC are

Thumb drives and Flash Card Readers (Both USB HDD and HUB are not

supported.)

Please connect directly to the USB port of your TV. If you are using a

separate cable connection, there may be a USB compatibility problem.

Before connecting your device to the TV, please back up your files to prevent

them from damage or loss of data. SAMSUNG is not responsible for any data file damage or data loss.

Do not disconnect the USB device while it is loading.

MSC supports MP3 and JPEG files, while a PTP device supports JPEG files only.

The sequential jpeg format is supported.

Photo and audio files must be named in English, French or Spanish. If not, the files can not be played. Change the file

names to English, French or Spanish if necessary.

The higher the resolution of the image, the longer it takes to display on the screen.

The maximum supported JPEG resolution is 15360X8640 pixels.

For unsupported or corrupted files, the “Not Supported File Format” message is displayed.

If the number of photo files exceeds 4000 (or the number of music files exceeds 3000), any files exceeding the 4000

limit may not be displayed in the Photo List (or Music List).

MP3 files with DRM that have been downloaded from a non-free site cannot be played. Digital Rights Management

(DRM) is a technology that supports the creation of content, the distribution and management of the content in an

integrated and comprehensive way, including the protection of the rights and interests of the content providers, the

prevention of the illegal copying of contents, as well as managing billings and settlements.
If more than 2 PTP devices are connected, you can only use one at a time. (Applicable to models LN46A860S2F,

LN52A860S2F only)
If more than one MSC device is connected, some of them may not be recognized. If a device requires high power

(more than 500mA or 5V), the USB device may not be supported. (Applicable to models LN46A860S2F, LN52A860S2F

only)

➣

➣
➣

➣

➣
➣
➣
➣

➣

HDMI IN4

TV Side Panel

USB Drive

[LN46A850S1F, LN52A850S1F]

HDMI IN4

TV Side Panel

USB Drive

[LN46A860S2F, LN52A860S2F]

BN68-01691A-00Eng.indb 75

2008-07-18 �� 10:24:46

Содержание LN46A850




























































































































































Результаты поиска

Содержание LN46A850

Отзывы:

Похожие инструкции для LN46A850

Бренды по названию

Популярные бренды

Samsung LN46A850, Руководство пользователя

Результаты поиска

Содержание LN46A850

Отзывы:

Похожие инструкции для LN46A850

Бренды по названию

Популярные бренды