English - 2
BN68-02605A-03
Setting the Clock
Before you can use your tV’s on/off timer, you must set the clock. to set the
clock, follow these steps:
1.
Turn on your TV.
2.
Using your remote, press the
MEnu
button on your remote.
Then, select
Setup
→
time
.
3.
Select
Clock Mode
, and then
press the
EntEr
E
button.
Set Clock Mode to Manual.
Select
✎
Auto
if you have a
digital channel in your area
and are not using a cable/sat
box.
4.
Select
Clock Set
, and then press the
EntEr
E
button.
The Clock Set screen appears.
5.
Using the number buttons on your remote, enter the
month
,
day
,
year
,
hour
,
and
minute
. Use the
◄
or
►
button to move between entry fields.
6.
Press the
rEturn
button on your remote when done.
Connecting a USB Device for Media Play
You can enjoy photo, music, and movie files
stored on a uSB device by connecting it to the
tV and using the Media Play feature. to connect
a uSB device for Media Play, follow these steps:
1.
Turn on your TV.
2.
Connect a USB device
containing photo, music and/or
movie files to the
uSB
jack on
the rear of the TV.
3.
When the Application selection
screen appears, press the
EntEr
E
button on your
remote to select
Media Play
(uSB)
.
Remote Control Buttons and Functions:
Changing the Picture Mode
Your TV has three preset Picture Modes with factory adjusted settings, each
designed to give you an excellent picture under specific conditions.
the Picture Modes are listed and described in the table below:
Mode
Description
Dynamic
Brightens picture. For a vibrant, enhanced image in brightly lit or
sunny room.
Standard
For a bright, detailed picture in a normally lit room.
Movie
For a studio quality cinema picture in a dimly lit or dark room.
to change the Picture Mode, follow these steps:
1.
With the TV on, press the
tooLS
button on your remote.
The
tools
menu appears.
2.
Using the
▲
or
▼
on your remote, select
Picture mode
.
3.
On the
Picture Mode
menu, use the
◄
or
►
on your remote to select
the
Picture Mode
you want.
4.
Press the
ExIt
button to exit the menu.
Viewing the On Screen Menus
to view the on Screen Menus, follow these steps:
1.
With the power on, press the
MEnu
button
on your remote. The main menu appears.
The menu’s left side has the following menu
options:
Picture
,
Sound
,
Channel
,
Setup
,
Input
,
Application
, and
Support
.
2.
Press the
▲
or
▼
button on your remote to
select a menu option, and then press the
EntEr
E
button.
3.
When done using the menu, press the
ExIt
button on your remote to exit.
MEDIA.P
A
B
C
D
MeNu
Changing the Screen Size
Your TV has several screen size options, each designed to work best with specific
types of video input. If you have a cable box or satellite receiver, it may have its own
set of screen sizes as well.
To change the screen size, press the
P.SIzE
button on your remote. The first time
you press it, your TV displays the current setting. Thereafter, each time you press
the
P.SIzE
button, you change the size of the picture on the screen.
the following sizes are available:
Screen Fit
✎
displays a full HD picture covering the entire screen with no cutoff
on any side. It is only available when your TV inputs an HDMI (720p, 1080i,
1080p), Component (1080i, 1080p), or DTV (over-the-air 1080i) signal.
16:9 Wide screen
Wide Fit
Zoom 1
4:3 Standard screen
Zoom 2
Screen Fit
Selecting a Source
To watch a movie on your Blu-ray player or watch your favorite TV show, you must
select the correct source. A source is a device, such as a Blu-ray/DVD player, a
cable/satellite box, antenna or a cable TV input. Sources can be connected to
your TV through the HDMI, DVI, Component,
Composite, or D-sub connections, or through
the Antenna or Cable In connections.
To view the signal from a source connected
to the HDMI, DVI, Component, Composite, or
D-sub jack, press the
SourCE
button on your
remote. Each time you press the
SourCE
button, you change to a different source.
Changing Channels and Adjusting the Volume
Channel
Volume
Change the channels by pressing
the
z
button on the remote.
You can also change the
channels by pressing the
z
buttons on
the front panel of your TV
and adjust the volume by
pressing the
y
buttons.
If your TV is attached to a cable or
✎
satellite box, change the channel
using the box’s remote.
Adjust the volume by pressing the
y
button on the remote.
MEDIA.P
A
B
C
D
MEDIA.P
A
B
C
D
MEDIA.P
A
B
C
D
Power Indicator
Remote control sensor
MEDIA.P
A
B
C
D
Return to the previous channel.
Press to switch between the sources (Blu-ray player,
cable box, DVD player, etc.) connected to your TV.
MTS
:
Press to choose stereo, mono or Separate
Audio Program (SAP broadcast).
P.SIZE
: Picture size selection.
CC
: Controls the caption decoder.
Cut off the sound temporarily.
Display Favorite Channel Lists on the screen.
Press to display information on the TV screen.
Exit the menu.
Change channels.
Display the main on-screen menu.
Basic Functions
Clock Set
U
Move
U
Adjust
E
Enter
R
return
Month
Hour
Day
Minute
Year
am/pm
--
--
--
--
----
--
L
Move
E
Enter
R
return
Press to select additional digital channels broadcast by
the same station. For example, to select channel 54-3,
press 54, press -, and then press 3.
Press number buttons for direct access to channels.
Turns the TV on and off.
Displays the channel list on the screen.
Quickly selects frequently used functions.
Use these buttons to select On Screen Menu items and
change menu settings.
Return to the previous menu.
View the
Media Play
.
Colored buttons for use in the
Channel List, Media Play
menu, etc.
Adjust the volume.
TV Rear Panel
uSB Drive
[LC350-QSG]BN68-02605A-03Eng_0831.indd 2
2010-08-31 �� 2:34:50
