Samsung LED TV Скачать руководство пользователя страница 15

Страница: 15 / 264

English

Basic

Featur

When Antenna Source is set to Satellite:

■

Channel Type (All / TV / Radio)

: Select the Channel

type to memorise.

■

Satellite

: Selects the satellite to scan.

■

Scan Mode (All Channels / Free Channels Only)

Selects the scanning mode of the selected satellite.

Manual Store

Scans for a channel manually and stores in the TV.

✎

If a channel is locked using the

Child Lock

function,

the PIN input window appears.

When Antenna Source is set to Air or Cable:

■

Digital Channel

: When scanning has finished, channels

are updated in the channel list.

✎

When selecting

Antenna

→

Air: Channel,

Frequency, Bandwidth

✎

When selecting

Antenna

→

Cable: Frequency,

Modulation, Symbol Rate

■

Analogue Channel (Programme, Colour System,
Sound System, Channel, Search)

: If there is abnormal

sound or no sound, reselect the sound standard
required.

✎

Channel mode

(programme mode): When tuning is complete,

the broadcasting stations in your area have been
assigned to position numbers from P0 to P99. You
can select a channel by entering the position number
in this mode.

(aerial channel mode) /

(cable channel mode):

These two modes allow you to select a channel
by entering the assigned number for each aerial
broadcasting station or cable channel.

When Antenna Source is set to Satellite:

■

Satellite

: Selects the satellite using the up/down

buttons.

■

Transponder

: Selects the transponder using the up/

down buttons.

■

Scan Mode (All Channels / Free Channels Only)

Selects either free or all channels to store.

■

Network Search (Disable / Enable)

: Enable / Disable

network search using the up/down buttons.

■

Signal Quality

: Display the current status of

broadcasting signal.

✎

Information on a satellite and its transponder is subject
to change depending on the broadcasting conditions.

✎

When setting is completed, move to

and press

the

ENTER

button. Channel scan is started.

Satellite System Setup

The PIN input screen appears. Enter your 4 digit PIN number.

Satellite System Setup

is available when

Antenna

is set to

Satellite

. Before runZning

Auto Store

, set

Satellite System Setup

. Then channel scan is run normally.

■

Satellite Selection

: You can choose the satellites for

this TV.

■

LNB Power (Off / On)

: Enables or disables the power

supply for the LNB.

■

LNB Settings

: Configures the outdoor equipment.

–

Satellite

: Selects the satellite for receiving digital

broadcasts.

–

Transponder

: Selects a transponder from the list or

adds a new transponder.

–

DiSEqC Mode

: Selects DiSEqC mode for the

selected LNB.

–

Lower LNB Oscillators

: Sets the LNB oscillators to a

lower frequency.

–

Upper LNB Oscillators

: Sets the LNB oscillators to a

higher frequency.

–

Tone 22 kHz (Off / On / Auto)

: Selects the Tone 22

kHz depending on the LNB type. For a universal LNB
it should be Auto.

–

Signal Quality

: Display the current status of

broadcasting signal.

■

Positioner Settings

: Configures the antenna positioner.

Positioner (On / Off)

: Enables or disables the positioned

control.

Positioner Type (USALS / DiSEqC 1.2)

: Sets

the positioned type between DiSEqC 1.2 and
USALS(Universal Satellite Automatic Location System).

–

My Longitude

: Sets the longitude for my location.

–

My Latitude

: Sets the latitude for my location.

–

Satellite Longitude Settings

: Sets the longitude of

user defined satellites.

User Mode

: Sets the position of satellite antenna

according to each satellite. If you store the current
position of satellite antenna according to a certain
satellite, when the signal of that satellite is needed,
the satellite antenna can be moved to pre-populated
position.

–

Satellite

: Selects the satellite to set the position for.

–

Transponder

: Selects a transponder from the list for

signal reception.

–

Moving Mode

: Selects the movement mode between

discrete and continuous movement.

–