Samsung LE32C650L1K, Руководство пользователя

Страница: 12 / 217

12
English
Basic Features
Channel Menu
¦ Retuning channels
Antenna (Air / Cable / Satellite)
Before your television can begin memorizing the available
channels, you must specify the type of signal source that is
connected to the TV (i.e. an
Air or a Cable system).
Country
The PIN input screen appears. Enter your 4 digit PIN number.
Digital Channel
■
: Change the country for digital
channels.
Analogue Channel
■
: Change the country for analogue
channels.
Auto Store
Scans for a channel automatically and stores in the TV.
Automatically allocated programme numbers may not
✎
correspond to actual or desired programme numbers. If
a channel is locked using the
Child Lock function, the
PIN input window appears.
When Antenna Source is set to Air or Cable:
Antenna Source (Air / Cable / Satellite )
■
: Select the
antenna source to memorise.
Channel Source (Digital & Analogue / Digital /
■
Analogue) : Select the channel source to memorise.
When selecting Cable
→
Digital & Analogue or Digital :
Provide a value to scan for cable channels.
Search Mode (Full / Network / Quick) : Scans for all
channels with active broadcast stations and stores them
in the TV.
If you set
✎
Quick
, you can set up
Network,
Network ID, Frequency, Modulation, Symbol
Rate
manually by press the button on the remote
control.
Network (Auto / Manual)
: Selects the
Network ID
setting mode among Auto or Manual .
Network ID : When Network is Manual , you can set up
Network ID using the numeric buttons.
Frequency : Displays the frequency for the channel.
(differs in each country)
Modulation : Displays available modulation values.
Symbol Rate : Displays available symbol rates.
When Antenna Source is set to Satellite:
Channel Type (All / TV / Radio):
■
Select the Channel
type to memorise.
Satellite (All / Astra 19.2E):
■
Selects the satellite to scan.
Scan Mode (All Channels / Free Channels Only):
■
Selects the scanning mode of the selected satellite.
Manual Store
Scans for a channel manually and stores in the TV.
If a channel is locked using the
✎
Child Lock function,
the PIN input window appears.
When Antenna Source is set to Air or Cable:
Digital Channel
■
: When scanning has finished, channels
are updated in the channel list.
When selecting
✎
Antenna Ž Air: Channel, Frequency,
Bandwidth .
When selecting
✎
Antenna Ž Cable: Frequency,
Modulation, Symbol Rate .
Analogue Channel (Programme, Colour System,
■
Sound System, Channel, Search, Store) : If there
is abnormal sound or no sound, reselect the sound
standard required.
Channel mode
✎
P
x
(programme mode): When tuning is complete,
the broadcasting stations in your area have been
assigned to position numbers from P0 to P99. You
can select a channel by entering the position number
in this mode.
C
x
(aerial channel mode) / S (cable channel mode):
These two modes allow you to select a channel
by entering the assigned number for each aerial
broadcasting station or cable channel.
When Antenna Source is set to Satellite:
Satellite
■
: Selects the satellite using the up/down
buttons.
Transponder
■
: Selects the transponder using the up/
down buttons.
Scan
■
Mode (All Channels / Free Channels Only) :
Selects either free or all channels to store.
Network Search (Disable / Enable
■
): Enable / Disable
network search using the up/down buttons.
Signal
■
Quality : Display the current status of
broadcasting signal.
Information on a satellite and its transponder is subject
✎
to change depending on the broadcasting conditions.
When
✎
setting is completed, move to Search and press
the ENTER
E
button. Channel scan is started.
BN68-02631G_Eng.indb 12 2010-03-03 �� 8:38:14