Samsung LE32A436T1D Скачать руководство пользователя страница 48

Страница: 48 / 63

English -

Connecting Devices

The system supports AV devices supporting only.

Check if there is an mark on the AV device to be connected to the TV.

To directly connect to TV

Connect the [HDMI 1], [HDMI

2] or [HDMI 3] jack on the TV

and the HDMI OUT jack of the

corresponding device

using the HDMI cable.

To connect to home Theater
1.

Connect the [HDMI 1],

[HDMI 2] or [HDMI 3]

jack on the TV and the

HDMI OUT jack of the

corresponding

device using the HDMI

cable.

Connect the HDMI IN jack

of the home theatre and

the HDMI OUT jack of the

corresponding

device using the HDMI

cable.

Connect only the optical cable between [Digital Audio Out (Optical)] on your TV and Digital Audio

Input on the receiver.

Connect only one receiver.

You can listen to 5.1 channel sound through the home theatre’s speakers. Otherwise, you can only

listen to 2 channel stereo sound in other cases. Make sure to connect the Digital Audio IN (Optical) of

the home theatre and the TV correctly to listen to TV sound through the home theatre. However, you

cannot listen to sound from the BD recorder that is sent to the home theatre via the TV in 5.1 channel

sound because the TV outputs only 2 channel stereo sound. Please see the manual for the home

theatre.

You can connect an device using the HDMI cable. Some HDMI cables may not support

functions.

works when the AV device supporting is in the Standby or On status.

supports up to 8 AV devices in total.

➣

What is ?

is an AV network system that enables an easy-to-use AV interface for users by controlling

all connected AV devices through the menu when Samsung Electronics AV devices are

connected.

Device 1 Device Device

hDMI Cable

Device 1

Device

hDMI Cable

home Theatre

Optical Cable

BN68-01464D-UK.indd 46

2008-03-18 �� 10:01:58

Содержание LE32A436T1D
































































Результаты поиска

Содержание LE32A436T1D

Отзывы:

Похожие инструкции для LE32A436T1D

Бренды по названию

Популярные бренды

Samsung LE32A436T1D, Руководство пользователя

Результаты поиска

Содержание LE32A436T1D

Отзывы:

Похожие инструкции для LE32A436T1D

Бренды по названию

Популярные бренды