Samsung LE26A456C2C Скачать руководство пользователя

Страница: 4 / 62

English -

List of Parts

Please make sure the following items are included with your LCD TV.

If any items are missing, contact your dealer.

Wall mount items (sold separately) allow you to mount the TV on

the wall.

For detailed information on installing the wall mount, see the

instructions provided with the Wall Mount items. Contact a

technician for assistance when installing the wall mounted bracket.

Samsung Electronics is not responsible for any damage to the

product or injury to yourself or others if you elect to install the TV on

your own.

Do not install your Wall Mount Kit while your TV is turned

on. It may result in personal injury due to electric shock.

Remove the stand and cover the bottom hole with a

cap and fasten with two screws.

➣

Connect your LCD TV and the stand.

Two or more people should carry the TV.

Make sure to distinguish between the front and back of the stand when assembling them.

Fasten two screws at position

and then fasten two screw at position

Stand the product up and fasten the screws. If you fasten the screws with the LCD TV placed

down, it may lean to one side.

The stand is installed for models with the screen size of 37 inch and above.

➣

Installing the Stand

Installing the Wall Mount Kit

M4XL16

Remote Control

& Batteries

(AAA x 2)

Power Cord

Cover-Bottom

Stand Screw

X 4

Stand

Cleaning Cloth



Owner’s Instructions



Warranty card



Safety Guide



Registration Cards

Warranty card / Safety Guide / Registration Cards (Not available in all locations)

The stand and stand screw may not be included depending on the model.

➣

BN68-01424B-Eng.indd 2

2008-04-25 ¿ÀÈÄ 5:56:41

Содержание LE26A456C2C































































Результаты поиска

Содержание LE26A456C2C

Отзывы:

Похожие инструкции для LE26A456C2C

Бренды по названию

Популярные бренды

Samsung LE26A456C2C, Руководство пользователя

Результаты поиска

Содержание LE26A456C2C

Отзывы:

Похожие инструкции для LE26A456C2C

Бренды по названию

Популярные бренды