background image

English -

1.

  Lift the cover at the back of the remote control upward as shown in the  

 

figure.

.

  Install two AAA size batteries.

Make sure to match the "+" and "–" ends of the batteries with the 

diagram inside the compartment.

.

  Replace the cover.

Remove the batteries and store them in a cool, dry place if you won’t 

be using the remote control for a long time. 

If the remote control doesn’t work, check the following: 

1. Is the TV power on? 

2. Are the plus and minus ends of the batteries reversed? 

3. Are the batteries drained? 

4. Is there a power outage, or is the power cord unplugged? 

5. Is there a special fluorescent light or neon sign nearby?

Installing Batteries in the Remote Control

Switching On and Off

the mains lead is attached to the rear of your set.
1.

  Plug the mains lead into an appropriate socket.

The standby indicator lights up on your set.

.

  Press the  button on your set.

You also can press the 

POWER

   button or the 

tV

 button on the remote control to turn the TV 

on.

The channel that you were watching last is reselected automatically.

.

   Press the numeric button (0~9) or channel up/down ( / ) button on the remote control or 

 

button on your set.

When you switch the set on for the very first time, you will be asked to choose language in which the 

menus are to be displayed.

.

  To switch your set off, press the 

POWER

button again.

Your set can be placed in standby mode in order to reduce the power consumption. the standby 

mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example).
1.

  Press the 

POWER

button on the remote control.

The screen is turned off and a red standby indicator appears on your set.

.

   To switch your set back on, simply press the 

POWER

, numeric buttons 

(0~9)

tV

 button or    

channel up/down ( / ) button again.

Do not leave your set in standby mode for long periods of time (when you are away on holiday, 

for example).  

It is best to unplug the set from the mains and aerial. 

Placing Your television in Standby Mode

BN68-01425H-Eng.indd   7

2008-05-13   ¿ÀÈÄ 4:42:16

Содержание LE22A451





































Отзывы: